My 2003 husqvarna 141 chainsaw has no spark.? I've replaced both the ignition module and the flywheel and set the gap at 0.011". I've disconnected the shut-off grounding wire and still no spark. Any suggestions? Thanks
I use an inline spark tester that I bought at Harbor Freight for a couple of bucks. Takes the guess work out of testing ignition spark. Remember that you have to turn the flywheel at about 250 rpm to produce a spark. Where did you get the gap spec? Sounds a bit wide but that shouldn't stop you from getting a spark. Have the module tested by a small engine shop.
Don't be fooled by it's apparent power and effectiveness though. Truth be known, a chainsaw is like a finely tuned athlete;it needs proper but basic maintenance and in return, it will provide you with years of winning performance.
Likewise, removing the chain and checking the guide bar for cleanliness is also recommended. Without regular checking of the oil outlets dust and oil build up can "cake" leading to performance restriction.
After performing and correcting these problems and you are still experiencing difficulties, then it's time to consider having your chainsaw looked at by an expert.
Testing the oiling system is simple and quite straightforward. To perform a check;make sure the oil reservoir is full, hold the saw about 3 inches above a piece of paper(preferably white) and revv the saw a few times. By depressing the oil lever while the saw is revving, you should notice a light oil mist spraying onto the paper. If not, then you may have problems.
As stated earlier, chainsaws require basic maintenance but if performed, you'll get years of regular use and service from them.
There are several steps you can take to locate the source of the problem. For instance, dust may have built up in the oil outlets. Your manual should highlight exactly where those oil outlets are located. They'll require careful cleaning.
There are not too many outdoor tools more versatile than the chainsaw. From cutting firewood to solid trees;from a delicate to a heavy duty job or whether you use a Stihl, Husqvarna, Echo or Jonsered machine, the trusty chainsaw will perform the job admirably.
One of the most common areas inexperienced and semi professionals tend to overlook is the chain oiling system. Most chainsaws have either an automatic or manual oiling system and performing regular checks will save you plenty in the long run.
eBay: At 4.60 kg, the 141 chainsaw is lightweight and easy to handle. With an engine power of 2.60 HP, this Husqvarna Chainsaw is good for all. Husqvarna 531300235 Chain Saw Maintenance Kit For 136, 137, 141 and 142, + , 531300446 16-Inch H36-56 (91VG) Lo-Pro Saw Chain. Products 1 - 50 of 221. Husqvarna Chainsaw manuals and owner instruction. Read 12 customer reviews of the Husqvarna 141 Chainsaw & compare with other Chainsaws at Review Centre.
Sears PartsDirect has manufacturer-approved parts and accessories for your model number 141 Husqvarna Chain saw. Parts for Husqvarna model 136 and 141 Chain Saws. Shop Bailey's for Husqvarna chainsaws, tree climbing gear and arborist equipment, woodcutting and firewood supplies, portable sawmills, lawn mower parts. Epinions.com - Read product reviews on Chain Saw 141 - Garden. Overall Rating: 3 stars from 9 consumer reviews at Epinions.com.
Have something to say? Post your comment below! Attention: comment messages with links are automatically rejected. HTML code is not allowed.